设为首页 | 登录 | 免费注册 | 加入收藏
文献检索:
  • Total height: 93.1cm, caliber diameter: 75.6 cm Excavated from Fufeng County, Shanxi Province. Preserved in Shanghai Museum
  • A new dynamic method for measuring hydrogen partial pressure in molten aluminum alloy
  • Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based bulk metallic glasses by microalloying
  • Improvement in collapsibility of ZrO2 ceramic mould for investment casting of TiAl alloys
  • In-situ observation of porosity formation during directional solidification of Al-Si casting alloys
  • Prediction and improvement of shrinkage porosity in TiAl based alloy
  • A new numerical simulation model for high pressure squeezing moulding
  • Optimization of tensile strength for new type acetone-urea-formaldehyde furan resin using uniform design
  • Niobium alloying effect in high carbon equivalent grey cast iron
  • Microstructure and mechanical properties of NZ30K alloy by semi-continuous direct chill and sand mould casting processes
  • Mechanism of pulse magneto-oscillation grain refinement on pure Al
  • Cast iron-a predictable material
  • Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts
  • Low temperature impact strength of heavy section ductile iron castings:effects of microstructure and chemical composition
  • Using lean methodologies for economically and environmentally sustainable foundries
  • Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions
  • Influence of Si,Ce,Sb and Sn on chunky graphite formation
  • Experimental determination of grain density function of AZ91/SiC composite with different mass fractions of SiC and undercoolings using heterogeneous nucleation model
  • Medical implants by using RP and investment casting technologies
  • Impact analysis of casting parts considering shrinkage cavity defect
  • Microstructure of fly ash cenosphere/AZ91D composite during solution treatment at 380-420℃
  • Effects of novel self-inoculation method on microstructure of AM60 alloy
  • The ancient Chinese casting techniques
  • Effects of scandium and zirconium combination alloying on as-cast microstructure and mechanical properties of Al-4Cu-1.5Mg alloy
  • Control of equiaxed grains in a complicated Cu-Ni based alloy prepared by centrifugal casting
  • Effect of hot extrusion process on microstructure and mechanical properties of hypereutectic Al-Si alloys
  • Colour Metallography of Cast Iron
  • Total height: 93.1cm, caliber diameter: 75.6 cm Excavated from Fufeng County, Shanxi Province. Preserved in Shanghai Museum
    A new dynamic method for measuring hydrogen partial pressure in molten aluminum alloy(Sun Qian Li Dayong Wang Lihua Zhang Jianlei)
    Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based bulk metallic glasses by microalloying(Peng Hao[1] Li Shuangshou[2] Huang Tianyou[1])
    Improvement in collapsibility of ZrO2 ceramic mould for investment casting of TiAl alloys(Chen Yanfei Xiao Shulong Tian Jing Xu Lijuan Kong Fantao Chen Yuyong)
    In-situ observation of porosity formation during directional solidification of Al-Si casting alloys(Zhao Lei[1] Liao Hengcheng[1] Pan Ye[1] Wang Qigui[2] Sun Guoxiong[1])
    Prediction and improvement of shrinkage porosity in TiAl based alloy(Gao Yong[1] Zhang Lijing[1] Gao Wenli[2] Zhang HU[1])
    A new numerical simulation model for high pressure squeezing moulding(Li Hua[1] Wu Junjiao[1] Huang Tianyou[1] Makino Hiroyasu[2])
    Optimization of tensile strength for new type acetone-urea-formaldehyde furan resin using uniform design(Lin Shengjun[1] Zhao Wei[1] Li Yuancai[1] Tong Siyi[2] Wang Wenqing[1])
    Niobium alloying effect in high carbon equivalent grey cast iron(Zhou Wenbin[1,2] Zhu Hongbo[1] Zheng Dengke[1] Zheng Hongxing[1,3] Hua Qin[1] Zhai Qijie[1])
    Microstructure and mechanical properties of NZ30K alloy by semi-continuous direct chill and sand mould casting processes(Zheng Xingwei[1] Dong Jie[1] Liu Wencai[1] Ding Wenjiang[1,2])
    Mechanism of pulse magneto-oscillation grain refinement on pure Al(Pei Ning[1] Gong Yongyong[1] Li Renxing[2] Xia Zanqi[2] Zhai Qijie[2])
    Cast iron-a predictable material(Jorg C. Sturm Guido Busch)
    Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts(Todor Ivanov Andreas Buhrig-Polaczek Uwe Vroomen)
    Low temperature impact strength of heavy section ductile iron castings:effects of microstructure and chemical composition(C. Labrecque[1] P. M. Cabanne[2])
    Using lean methodologies for economically and environmentally sustainable foundries(R. M. Torielli[1] R. A. Abrahams[1] R.W. Smillie[2] R.C. Voigt[1])
    Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions(A. Niklas[1] U. Abaunza[1] A.I. Fernandez-Calvo[1] J. Lacaze[2] R. Suarez[1])
    Influence of Si,Ce,Sb and Sn on chunky graphite formation(Hideo Nakae[1] Masayuki Fukami[2] Takayuki Kitazawa[3] Ying Zou[4])
    Experimental determination of grain density function of AZ91/SiC composite with different mass fractions of SiC and undercoolings using heterogeneous nucleation model(J. Lelito[1] P. Zak[1] J. S. Suchy[1] W. Krajewski[1] A. L. Greer[2] P. Darlak[3])
    Medical implants by using RP and investment casting technologies(Milan Horacek Ondrej Charvat TomasPavelka Josef Sedlak Martin Madaj Jindaich Nejedly Jan Dvoracek)
    Impact analysis of casting parts considering shrinkage cavity defect(Si-Young Kwak[1,2] Jie Cheng[2] Jeong-Kil Choi[1,2])
    Microstructure of fly ash cenosphere/AZ91D composite during solution treatment at 380-420℃(Huang Zhiqiu[1,2] Yu Sirong[1] Li Muqin[2] Liu Hongli[2])
    Effects of novel self-inoculation method on microstructure of AM60 alloy(Xing Bo[1] Li Yuandong[1,2] Ma Ying[1,2] Hao Yuan[1])
    The ancient Chinese casting techniques(Tan Derui[1] Lian Haiping[2])
    Effects of scandium and zirconium combination alloying on as-cast microstructure and mechanical properties of Al-4Cu-1.5Mg alloy(Xiang Qingchun Zhao Jing Pan Haicheng Hou Lina Li Rongde)
    Control of equiaxed grains in a complicated Cu-Ni based alloy prepared by centrifugal casting(Luo Zongqiang Zhang Weiwen Xin Baoliang Li Yuanyuan)
    Effect of hot extrusion process on microstructure and mechanical properties of hypereutectic Al-Si alloys(Li Runxia[1,2] Yu Fuxiao[2] Zuo Liang[2])
    Colour Metallography of Cast Iron
    《中国铸造:英文版》封面
      2006年
    • 01

    电  话:024-25847830 58851598

    国际标准刊号:issn 1672-6421

    国内统一刊号:cn 21-1498/tg

    单  价:18.00

    定  价:72.00


    关于我们 | 网站声明 | 合作伙伴 | 联系方式
    金月芽期刊网 2017 电脑版 京ICP备13008804号-2