|
||||||||||
基于CAN总线的DYY300型运梁车升降及调平系统原理设计与工程实现(Principle and Development of the DYY300 Bridge Transport Vehicle Horizontal Stable System)
基于 LabVIEW 的 CVT 离合器检测与控制系统实现(Detection and Control System for CVT Clutch Based on LabVIEW Software) 基于神经网络的虚拟测量系统故障检测(An ANN Fault Detection of Virtual Measurement Systems) 虚拟自控实验系统EPP接口(A EPP Interface of Virtual Experiment System for Auto Control) 基于LabVIEW的虚拟频谱分析仪(The Virtual Spectrum Analysis Instrument Based on LabVIEW) 电液伺服阀阶跃响应测试及其小波消噪处理(Testing and Wavelet-based Noise Suppression of Servo Valve Step Response) 基于CAN总线的分布式六维测力平台网络系统(Distributed Six Axes Force/Moment Platform Network System Based on CAN) "网络RTU"的实现(Realization of "Network RTU") CISN网络测试环境的构建(The Constitution of CISN Testing Environment) 利用PB开发网络应用系统中数据可靠性的研究(Research on the Data Reliability in Network Systems in PB) NEURON(○R)3150TM芯片与串行数模/模数转换器的接口设计(Interfacing the NEURON(○R) 3150TM Chip to D/A & A/D Converters with Serial Control) OPC技术在虚拟仪器系统开发中的应用(OPC Technology and Its Application to the Development of Virtual Instrument) 微机ARINC429总线智能接口卡设计(Microcomputer ARINC429 Bus Intelligent Interface Card Designing) 数字证书在网络办公系统中的应用(Digital Certificates Applied in Network Office) 用数字方法实现不同速率信号间的变换(Implementation of Multi-rate Signal Conversion Based on Digital Method) 心电信号的电话传输技术(The Technology of Transferring ECGs Through Public Telephone Network) 小波包在管道漏磁信号分析中的应用(The Application of Wavelet Packet in Flux Leakage Signals Analysis of Pipeline) 概率准则在多传感器数据融合中的应用(Probability Criterion Applied to Multi-sensors Data Fusion) 变量可信性策略和概率准则在传感器融合的应用(Probability Criterion and Quantity Creditability Tactics for Sensor Fusion) 信息融合技术在光电经纬仪中的应用(The Application of Information Fusion in Optical-electronic Theodolite) 测量系统不确定度分析及其动态性研究(The Analysis of Uncertainty and Research of Dynamic Character on Measurement System) 可拓检测技术及其应用初探(Extension Detecting Technology and Its Application) 仿真模型预测能力的度量方法研究(A Measurement Method of Model Predictive Capability) 信息提示及其在测试系统中的应用 神经网络在异常检测中的研究与应用(Using Neural Networks for Anomaly Detection) 嵌入式软件数学仿真测试研究(Embed Mathematical Simulation Test Research for Software) 分布参数对信号波形特征的影响(The Effects of Distributed Parameter on Signal Waveform Characteristics) 一种并行多通道数字测频方法及其实现 基于小波阈值去噪方法的研究(The Study of Denoising through Wavelet Shrinkage) 色噪声背景下基于旋转不变的互谱估计方法(Cross-spectral Estimation Based Rotational Invariance in Colored Noise) 基于BP网络的飞机电力起动系统故障诊断(Fault Diagnosis of Plane Electric Starting System Based on BP Neural Network) 基于现场总线的10kV高压开关柜在线检测及故障诊断系统(Online Measuring and Fault Diagnostic Sysytem for 10kV High Voltage Switchboard Based on Field Bus) 一种新型数字式滚动轴承故障诊断系统(A New Virtual Instrument System of Rolling Bearing Fault Diagnosis) 基于Internet和现场总线的测控系统研究(Researching for Measuring and Control System Based on Internet and Field Bus) 基于Windows Sockets的通信应用程序开发(Windows Sockets Based Communication Application Development) IEEE1394用于光电经纬仪数字图像通信的构想(IEEE 1394 Based Tentative Plan for Digital Video Communication in Photoelectronic Theodolite) 串行通信控制器在光电经纬仪实时通讯中的应用(Application of Serial Communication Controller in Real-time Communication of Optical-electronic Theodolite) 现场总线与企业信息网的集成(The Integration of Fieldbus and Intranet) CAN总线仪表通讯的智能化技术(Intelligent Technology of Communication in Automatic Instrument Based on CAN Bus) 基于VC++多参量虚拟信号分析仪(Virtual Signal Analyzing Instrument of Multi-parameter) 机械压力机操作规范的计算机控制(PC Control of the Operation Methods of Mechanical Press) 一种Windows环境下使用串口控制xy工作台的方法(A Control Method of xy Worktable with Serial Port on Windows) 用改进鼠标器实现步进电机X-Y轨迹的"画图"输出(The Output of Stepper Motor X-Y Locus Displayed on"Draw"by Means of an Modified Mouse) 警戒控制在投资中的应用(The Application of Security Control in Investment) 用涡轮流量计测量多相流流量(Flow Rate Measurement in Multiphase Flow Using Turbine Flow-meter) 低功耗多变量涡街变送器的研究(Research of Low Power Multi-variable Vortex Transducer) 基于子波变换的单支重构法在涡街流量传感器中的应用(A Single-branch Reconstruction Algorithm Based on Wavelet Transform for Vortex Flowmeter Signal Denoising) 智能化仪器仪表中的程序加密方法研究(Research on Program Encryption Method of Intelligent Instrument) 多电极电磁流量计励磁线圈的优化与设计(Design of Exciting Coils for Multi-electrode Electromagnetic Flowmeter) 基于电磁感应的液体粘度在线测量方法研究(Study on the Method of On-line Measuring Viscosity of Fluids Based on the Electromagnetic Induction) 基于虚拟仪器的微波功率测试仪的设计(Design of Microwave Power-measuring Instrument Based on Virtual-instrument) 装备性能模糊综合评判模型(Research on Comprehensive Fuzzy Evaluation Model of Armament) 基于小波神经网络的钢丝绳断丝定性和定量检测(Qualitative Classification and Quantitative Inspection for Broken Wires in Wire Ropes Based on Wavelet Neural Network) 虚拟现实在实验教学中的应用(Virtual Reality Application on Experiment Teaching) 基于网络化虚拟仪器的机器人传感器实验平台(Robot Sensor Experimental Platform Based on Networked Virtual Instruments) 基于智能技术的钢水温度软测量(Steel Temperature Soft Measurement Based Intelligent Technology) 电站锅炉烟气量在线软测量方法(A Method of On-line Soft-measuring for Flue Gas Flow on Power Station Boiler) 基于经验的阀控液压缸负载阻力的软测量方法(Soft Measuring Method of Load Force in a Valve Controlled Cylinder System) 数字式移相与频率合成的一种软件实现方法(A Method of Digitizing Phase Moving and Frequency Synthesizing by using Software Technique) 高强度聚焦超声的计算机模拟与实验分析(Computer Simulation and Experimental Analysis on the Distribution of HIFU Field) 室温发光硅基法布里-珀罗微腔的结构设计(Structure Design of Si-based Fabry-Perot Microcavity for Luminescence) 多晶锗硅(Poly-Si0.7Ge0.3)薄膜的制备(Preparation of Poly-Si0.7Ge0.3 Film) 高阻硅衬底上多孔硅牺牲层工艺的研究(Study on Using Porous Silicon as Sacrificial Layer in High Resistivity Silicon) RBN/DGPS系统中PRC精度及与卫星仰角的数学模型(Accuracy and Mathematic Model with Satellite Elevation of PRC in RBN/DGPS) 微机械的激光三维微成型技术(The 3D Laser Microfabrication Technology for Micromachines) 机械压力机节能新方法的研究(A New Method of Saving Energy in the Mechanical Press) 不同熟期冬小麦品种子粒钾含量的遗传研究(Heredity Study on Grain Kalium Content of Different Type Winter Wheat Varieties) 离子色谱法测定药物提取物中的对甲苯磺酸(Determination of p-Toluenesulfonic Acid with Suppressed Conductance Detector) 分析仪器在油砂沥青矿开发中的应用探讨(The Use of Analytical Instruments in the Exploitation of Oil Sand Bitumen Mine) 一种二氧化硅自动分析仪的设计(A Design of SiO2 Consistency Instrument) IRP/DSM技术与中国的可持续发展(IRP/DSM and Sustainable Development of China) 对建立环境与灾害监测信息共享系统的建议(Suggestions for Establishment of the IPS of MED) 时变大时滞系统的控制方法综述(Review the Control Schemes for Time-varying Large Time-delay System) 组播拥塞控制的凸规划模型(Convex Programming Model of Multicast Congestion Control) 双频测深仪对淤泥层测定的研究(A Study of Fluid Mud Layer Recognized by Echo Sounder) 基于嵌入式网络数据集中器的测控系统研究(The Measure-control System Studying based on Embedded Network-data Concentrator) 基于遗传算法的神经网络控制器(Neural Network Controller Based on Genetic Algorithm) 基于互联网的远程单片机控制(The Remote Control for Microcontroller Based on Internet) Java/CORBA 在分布式测控网络中的应用(Applying Java/CORBA to Construct Distributed Control and Measurement System) 预测-PID串级控制在纵向飞行通道中的应用(Predictive-PID Cascade Control and Application on the Longitudinal Flight Channel) 基于三层次客户机/服务器体系的优越性(The Advantages of Three-tier Client/Server System) 基于多Agent的供应链库存控制与协调方法的研究(Multi-agent-based the Research for Inventory Control and Coordination of Supply Chain) 网络办公自动化在生产中的应用(The Applying of Net Office Automation in the Production) 智能建筑的系统集成与控制应用(The System Integration and Control in Intelligent Building) 提高过程控制软件可靠性的一些措施(Some Measures for Improving the Reliability of Process Control Software) 同步数据采集技术在电力系统中的应用(Application of the Simultaneous Sampling Technique for Data Acquisition in Power System) 本质安全电路及其研究(Research on the Intrinsic Safety Circuits) 鲁棒二自由度PID控制(Robust Two-degree-of-freedom PID Control) 基于实时操作系统的啤酒发酵控制器(Fermentation Controller of Beer Based on Real Time Operating System) SLPC智能调节器在炉温控制系统中的应用(The Application of Digital Regulator in Temperature Controlling System) 预见PID控制在液压挖掘机控制中的应用(Application of Preview PID Control Technology to Hydraulic Excavator) 电弧炉变频模糊控制系统(The Frequency Conversion Fuzzy Control System on EAF) 视频监控跟踪系统的研究(Study on Video Supervision Tracking System) GPS多天线系统研究(Study of GPS Multi-antenna System) 炮塔综合测试仪电源控制系统的设计(Design of the Power Supply Control System of the Colligating Testing Appearance of Barbette) 避雷器的发展及其应用(The Development and using of Lightning Arrester) 电气参数的动态估计和能量优化方法(Dynamic Estimation of Electric Parameters and Energy Optimization) 户外移动机器人运动控制器的设计及实验(The Design and Experiment of Outdoor Mobile Robotic Locomotion Controller) 相移算法模拟实验研究(Computer Simulation of Phase-shift Algorithm) VCS振动控制系统控制算法研究(VCS Vibration Control System Control Algorithm) 分布式实时铁路轨温、降雨量无线遥测系统(A Distributed Real Time Rail Temperature and Rainfall Radio Telemetering System) 一种便携式测温仪的研制(Design of a Portable Measurement Temperature Instrumentation) 基于非晶硅薄膜晶体管的室温红外探测器(Uncooled Infrared Detector Based on a-Si:H Thin Film Transistor) 室温微测辐射热计线性阵列的设计与制作(Design and Fabrication of Linear Uncooled Microbolometer Array) 一种使用改进力敏差放的压力传感器设计(Pressure Sensor using Revised Stress Sensitive Differential Amplifier) 集成PMOS环振式压力传感器(Integrated Silicon Pressure Sensor with PMOS Ring Oscillators) SnO2基CO气敏元件的研究(Research on the SnO2 Gas Sensor for CO) 垂直腔体表面光发射器件的模拟与实践(Design and Fabrication of Vertical Cavity Surface Light Emitter) 光纤Fabry-Perot干涉式温度的测量(The Optical Fiber F-P Interferometric Temperature Measurement) 一种新型自混合激光干涉光纤应变传感器(A Novel Fiber Optic Strain Sensor Based on Self-mixing Laser Interference) 经纬仪大尺寸柔性三坐标测量系统的开发与应用(Development and Application of Flexible Large Dimension 3D Measurement System of Theodolites) 激光干涉动态角度测量系统中指零仪的设计(Design of the Null-indicator in Dynamic Angle Measurement with Interference) 水中矿物油全光纤三维荧光测量仪(An all Fiber-optical Measurer of Mineral Oil in Water based on Threedimensional Fluorescent Light Spectrum) 污水处理转刷曝气自适应控制系统的研究(李辉 谯刚 武好明) 液面监测装置及其模糊控制系统的研制(Liquid Height Measurement Equipment and Its Fuzzy Control System) 浮力式明渠流量计的研究(Research on Buoyancy Flume Flowmeter) 油田分层注水流量计的研究(Stdy on Flow Meter Used in Pouring Water to Oil Layer) 自动化系统中的图形用户界面设计(Design on Graphic User Interface for Automation System) HART智能仪表在机场供油自动化系统中的应用(Application of HART Intelligent Instrument in Airport Refueling Automation System) 强关联复杂系统的解耦控制策略(Decoupling Control Strategy for Strong Cross-correlation Complex System) 基于ECT、ERT信息融合的油/气/水参数测量研究(Parameter Measurement of Oil/Gas/Water Flow Based on ECT & ERT Information Fusion) 电容层析成像硬件系统(Hardware of Electrical Capacitance Tomography) 复杂性理论在气固流体床流型识别中的运用(Application of Complexity Theory on Identification Flow Regimes in Gas-solid Fluidized Bed) 大电流测试仪表检定方法的探讨(The Technology Study of Verifing High Current test Apparatus) 基于信息融合技术的气固流化床流型辨识(Identification of Flow Regime of Gas-solid Fluidized Bed by Using Technique of Multisensor Information Fusion) 信息传输矩阵在气-固流化床流型识别中的应用(Application of Information Transmission Matrix in Fluidized Regimes Identification of Gas-Solid Fluidized Bed) 气固流化床流化本质的非线性特征提取(Non-linear Characteristic Investigation of Gas-solid Fluidized Bed) 智能控制在手性药物分离系统中的应用(Intelligent Control Applied to the System of Medication Separation) 基于USS协议的多台变频器的远程监控(Measure and Control Multi-micromaster Inverter by USS Protocol) 一种电容式角位移变送器的研究(Research of Capacitive Angular-position Transducer) 热风炉燃烧过程的优化控制(Optimizing Control on Combustion Process for Hot Blast Stove) 用二次曲线极小值原理实现玻璃窑炉燃烧系统优化控制(Implementation of Optimum Control of Glass Furnace Combustion System with Quadratic Curve Minimum Principle) 基于实时监测的管网供热损耗模型及分析系统(Model for Heat Wastage of Pipe-net Based on Supervision on-line) 电感电路放电时间的测量(The Measurement of Discharge Time of Inductance Circuit) 基于拉坯阻力的板坯连铸结晶器漏钢预报(Mould Friction Based Steel Leakiness Prediction of Oscillation Motor) 气固流化床多参数信号特征提取(Character Analysis on Multi-signals in a Gas-solid Fluidized Bed) 气液两相流动态差压信号分析(Analysis on Dynamical Differential Pressure Signal of Gas-liquid Two-phase Flow) 基于神经网络的水平管中气/液两相流流型识别(Gas/Liquid Two-phase Flow Regime Identification Based on Neutral Network in Horizontal Pipes) 涡街流量计的系列研制和信号处理技术(The Series Manufacture and Signal Processing Technology of Vortex Flowmeters) 涡街流量传感器频率信号的扩频(Expansion of the Vertex Flow Transducer's Frequency Signal) 基于科里奥利质量流量计动态数据测量研究(The Research of Dynamic Measurement Based on Coriolis Mass Flow Meter) 科里奥利质量流量计Ω形测量管的有限元分析(Finite Element Analysis of Ω Tube Coriolis Mass Flow Meter) 航天光学遥感器仿真系统设计方案探讨(Outline of System Simulation Technology for Remote Sensor Used in Space Borne) 一种分析磁光波导的近似方法(The Analysis of Magneto-optic Rib Waveguide by an Approximate Method) 激光多普勒离面振动测量的研究(Research on the Longitudinal Vibration Measurement with Laser Doppler Technology) 一种大功率激光输出功率低频波动的直接测量法(A Novel Direct Measure Technology for Low-frequency Fluctuation of High-power Lasers) 大量程光纤测距技术的研究(Researches on Large Range Distance Measurements by Optical Fibre Interferometry) 基于白光扫描轮廓仪的算法研究(Algorithmic Research Based on White Light Scanning Profiler) 光学筒长变化检测法(A Method to Check the Optical Path Difference) 四象限光电探测器用于二维小角度测量的研究(Research of Dual Axis Small Angle Measurement Based on High Sensitivity Quadrant Detectors) 光纤光栅传感器交叉敏感问题的研究(Researches on Cross Sensitivity Problem of Fiber Grating Sensors) 谐波与圆度误差分析的范数理论(Norm Theory of Harmonic and Roundness Error Analysis) 减小圆度测量中2RC滤波传输偏差的新方法(A New Approach for Decreasing 2RC Filtering Amplitude Characteristic Deviation in Roundness Measurements) 夹具动态特性与振动试验控制精度的关系研究(Dynamic Performance of Fixture and Control Precision of Vibration Test) 激光热轧带钢平直度测量方法研究(Calculation Method Research on Laser Flatness Measuremnt for Hot Strip steel) 热轧带钢浪形滑动现象及其对平直度测量的影响(Wave-shape Sliding Phenomenon of Hot Strip Steel and its Effect to Flatness Measurement) 一种测量活塞裙部曲线方法的研究(Study on Measurement Method for Piston Skirt Curves) 数字信号处理的动态弹性模量测定新方法(The New Digital Measure Method Of Dynamic Elastic Modulus) 圆弧型弹性弯管频率特性的有限元分析(Analysis of Frequency Characteristics for the Circular Arc Tube using FEM) 热激励硅谐振式压力传感器温度场的有限元计算(Simulations of Temperature Profile of Thermal Excited Silicon Resonant Pressure Sensor using FEM) Ba/Ti、Ba/Cu比对电容型CuO-BaTiO3 CO2气体传感器灵敏度的影响(Ba/Ti and Ba/Cu Proportion Effect on the Sensitivity of CuO-BaTiO3 Capacitive-type CO2 Sensor) 基于动态链接库技术的传感器非线性特性校正(Non-linear Characteristics Correction for Transducers based on Dynamic Link Library (DLL)) 基于数据融合技术的多传感器目标跟踪系统(Multisensor Target Tracking System Based on Data Fusion) DSP/BIOS在数据采集程序设计中的应用(Using DSP/BIOS in Data Acquisition Application Design) 基于USB微处理器的数据采集系统设计(Design for Data Acquisition System Based on USB Microcontroller) 多DSP并列高速信号处理器的设计与实现(A R&D Application for Multi High Speed DSP Array Board) 单片机系统中复位电路的可靠性分析与设计(Discussion on the Reliability Design about Rest Circuit Used in Monolithic Microcomputer System) MAX629在DC-DC转换电路中的应用(The Application of MAX629 in the Convert Circuit) 具有BDD结构的电路模拟并行计算方法(A Method for Solving BDD Linear Equations by Coordination Partitioning) 基于数字信令的集群逻辑控制器测试仪的设计(Design of the Instrument of Trunked Logic Units Based on Digital Signaling) 压裂酸化仪数据采集系统的研制与开发(Design and Implementation of a Real Time Metrical System Applying in Acidification & Pressing Crack Oilfields) 计算机辅助粉尘浓度检测系统(Multi-waver-length Extinction Detection Method for Dust) 基于单片机的低功耗温湿度数据采集器的研制(The Study of Temperature and Humidity Data Collector of Low-power about Simple Computer) 基于混沌的窄带超声检漏系统研究(Study on Narrow Band Ultrasonic Leak Testing System Based on Chaos) 调光马达综合性能自动测试系统的设计与实现(Design and Relization of the Automatic Test System for Electrical Headlight Spacing Adjustor) 一种新型在线冷却水动态模拟试验装置(A New On-line Cooling Water Simulated Dynamic Test Equipment) CYZ型惠斯登电桥墒情测量仪的研制(Research of the Model CYZ Soil Moisture Measuring Apparatus with the Wheatstone Bridge) 基于BST技术的印制电路板的测试(The Test of PCB Based on BST) 霍尔叶片传感器的设计与开发(The Design and Development of Hall-effect Vane Sensors) 磁弹硬度检测仪的研制(Development of Testing Hardness Instrument by means of Magneto-elasticity Noise Technique) 视频序列中运动目标分割算法(An Algorithm of Moving Object Segmentation in Video Sequence) 多目标运动变化检测及空域定位新方法(Method for Change Detection and Spatial Location in Real-time Scene) 视频目标标识文本视觉特征与模糊识别(Fuzzy Recognition of Text in Video Sequences Based on Computer Vision) 工业CT断层图像缺陷检测的可视化方法研究(Industrial CT Cross-section Image Visualization for Defects Detection) 红外图像序列中微弱点状动目标的非参数检测(Nonparametric Detection of Dim Moving Point Targets in IR Image Sequences) 交通事故现场勘查中车轮图像的自动搜索 基于PSTN的车流交通视频监测系统的研究(The Research for the Traffic Video Monitoring System based on PSTN) 高速公路自动监测收费系统的研制(Development of Automatic Monitoring Toll System for Expressway) 电阻层析成像均匀场域的建立方法(A New Method of Establish Uniform Area In Electrical Resistance Tomography) 基于神经网络技术的电能表示值提取方法研究(A Study on Locating the Kilowatt-hour Value Based on Neuron Network) 坦克传动系统的油料光谱分析、故障诊断专家系统(Fault-diagnosis Expert System for Tank's Driving System by Oil Spectrum-analysis) 抽油机游梁振幅的视频检测(A Video Measuring for the Vibration Amplitude in Beam of Pumping Units) 微操作机器人显微视觉系统自动调焦的实现(The Implement of Auto-focus Method on Micro-vision System for Micromanipulation Robot) 工件孔心距的视觉测量(Vision Inspection on Distance of Two Hole Centers) 虹膜身份鉴别系统算法研究(Algorithm Study of Iris ID Recognition System) 医学超声图像交互型目标检测(Interactive Model of Detecting Object in Ultrasound Image) 手掌形状身份识别系统特征参量提取技术(The Technology of Extracting the Characteristics Parameter in the System of Identity Recognition Based on Palm Shape) 基于神经网络的电路多故障测试及并行实现(Multiple Fault Test Based on Neural Networks and its Parallel Implement) |
|||||
|
往期回顾
2009年第04期2009年第03期 2009年第02期 2009年第01期 2008年第12期 2008年第11期 2008年第10期 2008年第09期 2008年第08期 2008年第07期 2008年第06期 2008年第05期 |
||